Hierarchical Bayesian modeling to quantify fracture limit uncertainty of high-burnup advanced fuel cladding tubes under loss-of-coolant accident conditions

Narukawa, Takafumi; Hamaguchi, Shusuke*; Takata, Takashi*; Udagawa, Yutaka

Nuclear Engineering and Design, 411, p.112443_1 - 112443_12, 2023/09

https://doi.org/10.1016/j.nucengdes.2023.112443

Study on the effect of long-term high temperature irradiation on TRISO fuel

Shaimerdenov, A.*; Gizatulin, S.*; Dyussambayev, D.*; Askerbekov, S.*; Ueta, Shohei; Aihara, Jun; Shibata, Taiju; Sakaba, Nariaki

Nuclear Engineering and Technology, 54(8), p.2792 - 2800, 2022/08

https://doi.org/10.1016/j.net.2022.02.026

Study on mechanism and threshold conditions for fuel fragmentation during loss-of-coolant accident conditions

Narukawa, Takafumi; Udagawa, Yutaka

Proceedings of TopFuel 2021 (Internet), 10 Pages, 2021/10

Improvement of intragranular fission gas behavior model for fuel performance code FEMAXI-8

Udagawa, Yutaka; Tasaki, Yudai

JAEA-Data/Code 2021-007, 56 Pages, 2021/07

JAEA-Data-Code-2021-007.pdf:5.05MB

Japan Atomic Energy Agency (JAEA) has released FEMAXI-8 in 2019 as the latest version of the fuel performance code FEMAXI, which has been developed to analyze thermal and mechanical behaviors of a single fuel rod in mainly normal operation conditions and anticipated transient conditions. This report summarizes a newly developed model to analyze intragranular fission gas behaviors considering size distribution of gas bubbles and their dynamics. While the intragranular fission gas behavior models implemented in the previous FEMAXI versions have supported only treating single bubble size for a given fuel element, the new model supports multiple gas groups according to their size and treats their dynamic behaviors, making the code more versatile. The model was first implemented as a general module that takes arbitrary number of bubble groups and spatial mesh division for a given fuel grain system. An interface module to connect the model to FEMAXI-8 was then developed so that it works as a 2 bubble groups model, which is the minimum configuration of the multi-grouped model to be operated with FEMAXI-8 at the minimum calculation cost. FEMAXI-8 with the new intragranular model was subjected to a systematic validation calculation against 144 irradiation test cases and recommended values for model parameters were determined so that the code makes reasonable predictions in terms of fuel center temperature, fission gas release, etc. under steady-state and power ramp conditions.

Four-point-bend tests on high-burnup advanced fuel cladding tubes after exposure to simulated LOCA conditions

Narukawa, Takafumi; Amaya, Masaki

Journal of Nuclear Science and Technology, 57(7), p.782 - 791, 2020/07

https://doi.org/10.1080/00223131.2020.1724207

Fracture limit of high-burnup advanced fuel cladding tubes under loss-of-coolant accident conditions

Narukawa, Takafumi; Amaya, Masaki

Journal of Nuclear Science and Technology, 57(1), p.68 - 78, 2020/01

https://doi.org/10.1080/00223131.2019.1659873

Behavior of high-burnup advanced LWR fuel cladding tubes under LOCA conditions

Narukawa, Takafumi; Amaya, Masaki

Proceedings of International Nuclear Fuel Cycle Conference / Light Water Reactor Fuel Performance Conference (Global/Top Fuel 2019) (USB Flash Drive), p.912 - 921, 2019/09

Oxidation behavior of high-burnup advanced fuel cladding tubes in high-temperature steam

Narukawa, Takafumi; Amaya, Masaki

Journal of Nuclear Science and Technology, 56(7), p.650 - 660, 2019/07

https://doi.org/10.1080/00223131.2019.1613268

Research and development on high burnup HTGR fuels in JAEA

Ueta, Shohei; Mizuta, Naoki; Sasaki, Koei; Sakaba, Nariaki; Ohashi, Hirofumi; Yan, X.

Proceedings of 27th International Conference on Nuclear Engineering (ICONE-27) (Internet), 8 Pages, 2019/05

JAEA has been progressing to design HTGR fuels for not only small-type practical HTGRs but also VHTR proposed in GIF which can be utilized for various purposes with high-temperature heat at 750 to 950 C. To increase economy of these HTGRs, JAEA has been upgrading the design method for the HTGR fuel, which can maintain their integrities at the burnup of three to four times higher than that of the conventional HTTR fuel. Design principles and specifications of various concepts of the high burnup HTGR fuels designed by JAEA are reported. As the latest results on post-irradiation examinations of the high burnup HTGR fuel progressing in a framework of international collaboration with Kazakhstan, irradiation shrinkage rate of the fuel compact as a function of fast neutron fluence was obtained at around 100 GWd/thm. Furthermore, the future R&Ds needed for the high burnup HTGR fuel are described based on these experimental results.

Investigation of irradiated properties of extended burnup TRISO fuel

Shaimerdenov, A.*; Gizatulin, S.*; Kenzhin, Y.*; Dyussambayev, D.*; Ueta, Shohei; Aihara, Jun; Shibata, Taiju

Proceedings of 9th International Topical Meeting on High Temperature Reactor Technology (HTR 2018) (USB Flash Drive), 6 Pages, 2018/10

The Institute of Nuclear Physics of the Republic of Kazakhstan (INP) conducts an irradiation test and post-irradiation examinations (PIEs) of the high-temperature gas-cooled reactor (HTGR) fuel and materials to develop the extend burnup fuel up to 100 GWd/t-U collaboratively with the Japan Atomic Energy Agency (JAEA) under projects in a frame of the International Science and Technology Centre (ISTC). Cylindrical fuel compact specimens consisting of newly-designed TRISO (tri-structural isotropic) coated fuel particles and a matrix made of graphite material were manufactured in Japan. An irradiation test of the fuel specimens using a helium-gas swept capsule designed and constructed in the INP has been performed up to 100 GWd/t-U in the WWR-K research reactor by April 2015. In the next stage, PIEs with the irradiated fuel specimens have been started in February 2017 as a new ISTC project. Several PIE technologies by non-destructive and destructive techniques with irradiated fuel compacts were developed by the INP. This report presents the developed technologies and interim results of the PIE for high burning TRISO fuel.